This video describes how to add a dual motor in your GVC 1 and GVC 2 vending machines. Start by lifting up on the tabs on the end of the black motor cover on the tray and slide it across the tray before lifting it off. Next, ensure you remove the wires from the single motors with a pair of pliers.  Then, unhook the motors from the coupler and replace them with dual motor. The common red and white wire goes on a side connection. 

This video teaches the best practices, including coil sizes needed, for loading specific products in your vending machine.

This video will teach you how to pair coils and motors on a steel tray in your refrigerated vending machine.

For further information or support, visit our Help Center

Language: English
Product Type: Motors
Difficulty: Moderate
Duration: 15-30 Minutes
Models: 3535, 3565, 3566, 3573, 3574, 3575

Produits connexes

Voir tout
Economisez $7.12
Can/Beverage Machine Motor - Vendnet
Vendnet Moteur de machine à canettes/boissons
Prix réduit$37.88 Prix normal$45.00
Economisez $7.88
Low Temp Left Turning Single Motor - Vendnet
Economisez $5.73
Motor Cover - Vendnet
Vendnet Couvercle du moteur
Prix réduit$23.27 Prix normal$29.00
Dual Motor - Vendnet
Vendnet Double moteur
Prix réduit$44.42
Economisez $11.17
Low Temperature Right Turning Motor - Vendnet
Vendnet Moteur tournant à droite à basse température
Prix réduit$33.83 Prix normal$45.00
Economisez $13.11
360 Degree Dual Motor - Vendnet
Vendnet Double moteur à 360 degrés
Prix réduit$91.89 Prix normal$105.00
Dual Motor - Vendnet
Needinfo Double moteur
Prix réduit$55.60