Modelo 3561 Envío Skid Removal

Your machine is shipped on wood skids that need to be removed.

Tools you need include a hammer and large screwdriver or pry bar.

To remove the shipping skid boards that came with your machine, use a pry bar, crow bar or large screwdriver and drive it into the separation line located in the center of each skid board end. This separation line is used to split the wood away from the leg.

You can then knock the boards away from the legs. Due to the weight of the machine this may be easier with a helper pushing on the side of the machine to take the pressure off while you separate the wood from the legs. You can then dispose of the boards and the metal washers.

Please see our video tutorial library for full machine set up videos.

Duration: 5 Minutes or less
Models: 3561, 3563