Utilisation de l\'outil de programmation GVC - Comment télécharger une nouvelle programmation de machine

This video explains how to use the GVC tool to update the software in your machine. Turn the power off and take the control board cover off. Put the jumper over the tiny pins to the right of a silver box on the control board. Then, turn the machine back on and a red light will flash slowly in the upper right-hand corner. This shows that the vending machine is powered on.   

Now, take the GVC programming tool and push the button one time for it to wake up. Take the plug and plug it into the DEX socket and the light then goes to green. Next, push the button again and it should change color, go back to green and then a rapid flash. It takes five to six minutes for a program to load.

Don’t forget to check out the GVC 1 programming video tutorial section as well as our online vending machine parts store.

For additional support, visit our Help Center.