Flex Snack Control Board Replacement

This video takes you through the step-by-step procedure to replace the control board of your Flex Controlled Snack Machine. To start with, power off your vending machine. Unplug the wiring pertaining to your control board after taking a picture of the same, so that you won’t find any issues while plugging in the same. Remove the control board from the 6 latches. Attach the new control board to the 6 pins and reattach the proper connections. Power up the machine and enter service mode and perform a motor count. Also, make sure the necessary motors are paired.

For additional support, visit our Help Center or Flex Control Board Programming video page.