Full Machine Set Up (Models 3605 & 3606)

Your brand new ambient snack vending machine is fully ADA compliant and perfect for making money dispensing chips, candy, pastries and more to your customers. Our machines are built with the best materials, manufactured in the U.S.A. and are designed to provide vendors with dependable operation well into the future.  

Tools required for machine installation include:

1:15 Machine Damage Protocol

1:57 Find Keys & Open Door

2:14 Install Power Cord

2:52 Remove Shipping Skids

4:23 Plugging In Machine & Electrical Safety

5:21 Leveling Machine

6:17 Coin Mechanism & Bill Acceptor

9:31 Loading Product

10:50 Replace Coil

11:24 Install Dual Motor

12:15 Product Pushers

When receiving your ambient snack vending machine make sure you have the necessary tools to unpackage the machine, remove shipping skids, and level machine.  Be sure to inspect the exterior of all cartons for damage after you receive the vending machine. Examine the equipment visually for signs of damage. If there is any damage, specify where the damage is located and take photos and send them to the factory. You can find the keys to your machine in the coin return slot in the lower right area on the front of the machine. 

Before plugging the power cord to the wall socket, you must check the integrity of the main electrical supply for correct polarity, presence of good ground, and the correct voltage.  

On the bottom of the cabinet, you will find a packet with the machine service manual and snap on leg covers. You can easily complete the remaining procedures by referring to this video. 

This video also describes how to set up your coin mechanism and bill acceptor as well as how to load items into each selection in the machine.

Find our selection of motors and coils on our website for online ordering.

See our full library of Flex programming videos here.

Language: English
Difficulty: Easy
Duration: 1 hour or more
Models: 35606, 3605
Parts Manual Service manual