Reemplace Greenlite Seed con Greenlite Engage (modelos 3605 y 3606)

In this video, you will be guided on how to replace the Greenlite Seed card reader with a Greenlite Engage card reader on your Model 3605 & 3606 snack vending machine. You will need the:

• Greenlite Engage kit
• An 11/32” nut driver
• Zip ties
• A blade to cut zip ties.

First, make sure the machine is powered off and unplugged. Then, disconnect the antenna from the Telemetry device, take off the antenna, and remove the telemetry device. Next, unplug the MDB harness, which connects the telemetry device with the coin mechanism and control board.

Remove the card reader and deactivate it so you don't get recurring charges. Finally, install the Greenlite Engage card reader from the kit and install the Antenna. You can then use zip-ties to organize the wires and boot up the machine with your new Greenlite Engage Device.

Find more Greenlite credit card reader videos here.